Control Gear Wiring Diagrams

Please click the links below to download PDF copies of the wiring diagrams for various lamp control gear combinations. All diagrams are based on a nominal supply voltage of 240 V, and no liability is accepted for any inaccuracies in the diagrams, or for any losses or damages that result from using the diagrams to wire up control gear components. Capacitors are generally not included in these diagrams, but should be connected for improved circuit Power Factor. For details of how to wire and install NEMA photocells, please click here to view instructions prepared by RS Components.

High Pressure Sodium (SON / HPS / NAV / SHP ) and Metal Halide (MH / MBI / CDO / CMH / HPI / HQI )

Parmar / Venture

Philips

Philips Ballast with Venture Ignitor

Thorn 70 Watt (G53320.T Ballast and G53353.4 Ignitor)

Thorn 150 Watt / 400 Watt  (G53335.T / G53371.T Ballast and G53282.A Ignitor)

Thorn 150 Watt / 250 Watt / 400 Watt (G53460.T / G53398.T / G53371.T Ballast and G53455 / G53459 Ignitor)

Thorn 150 Watt (GF53521.4 SHP 150 Ballast with Tridonic three-wire Ignitor)

Thorn 250 Watt / 400 Watt (G53398.T / G53371.T Ballast and G53282.A Ignitor)

Tridonic 50 / 70 Watt (OMBS 70/50 Z603W Ballast and ZRM 2-ES/B Ignitor

Tridonic 100 Watt (OMBIS 100 A604W Ballast and ZRM 100 M Ignitor)

Tridonic Ballast with Philips Ignitor

Tridonic


Low Pressure Sodium (SOX / LPS)

Standard Wiring Diagram

Standard Wiring Diagram (NEMA Socket)

GEC Z1616 35 Watt / 55 Watt Ballast with integral ignitor

GEC Z1616 35 Watt / 55 Watt Ballast (modified circuit for use when the integral ignitor has failed)

GEC Z1616 35 Watt / 55 Watt Ballast (modified circuit for use when the integral ignitor has failed, using a Tridonic ZRM 36 replacement ignitor)

GEC Z1619 35 Watt Ballast

GEC Z1634X 135 Watt / 180 Watt Ballast

Philips L4135 135 Watt / 180 Watt Ballast


BACK TO CONTROL GEAR PAGE

BACK TO INDEX PAGE

CLICK HERE TO MAKE A MONETARY DONATION

© 2002 - English Street Lights Online